OPEN CELL CEILINGS, manufactured by PROMETAL
The open cell ceilings manufactured by PROMETAL are intended for the manufacture of ceiling systems in commercial areas, public areas, exhibition and conference centres, enclosures and access areas in high traffic buildings, fuel stations, airports, supermarkets, metro stations. Metal panels are available in colours with any RAL code. Specific advantages:
continuity of surfaces without the load bearing structure or joints;
avoid cutting the panels for installations in the ceiling cavity;
installation of the panels by inset allows the inspection of any area in the ceiling cavity.
Due to the system flexibility (wide range of shapes and colours), the play of light created by locating a diffused lighting system in the ceiling cavity or by spotlights positioned within the cells, the open cell ceilings feature multiple architectural opportunities.
Smoke evacuation can be done through false ceiling cells that mask the installations located in the space created between the ceiling and the false ceiling, giving the image of a uniform and unitary ceiling.
The most important advantage of using this type of ceiling is: continuity of surfaces, without seeing the load bearing structure or joints.
Another feature of the cell ceiling is to avoid cutting the panels for mounting the installations in the ceiling cavity. The terminals can be positioned according to the technical requirements, without changing the panels.
The mounting of panels by fixing allows the inspection of any space in the ceiling cavity, so only a minimum of attention is sufficient during the dismantling and mounting of the panels.
Class "0" D.M. dt 26.06.84 (S.O.G.U. n° 234 dt 25.08.84)
D.M. dt 14.01.85 (G.U. n° 16 dt 19.01.85)
Both for steel and aluminium.
The flexibility of the system allows mounting various accessories:
Lighting fixtures: light channels, ceilings, embedded spotlights, etc.;
Air diffusers: air suction and discharge grilles, ceiling diffusers, ventilators;
Safety systems: sprinklers, smoke detectors, etc.
STORAGE AND HANDLING
Panels are stored in dry and covered areas.
The panels are kept in their own packaging until installation.
Cartons must be stored and oriented as per instructions.
Special care must be used during handling and opening of boxes to avoid damages.
For proper maintenance, the following instructions must be followed:
Dust should be removed from the surface by wiping with a clean soft cloth.
Any greasy stains will be cleaned with the aid of a fine detergent, especially for this type of product.
Don't use abrasive cleaners or rough fabrics (abrasive materials).
Cleaning is done by simply wiping and in no case by rubbing.
White (similar RAL 9003)
Silver (similar RAL 9006)
On the basis of order, depending on our material stock, other colours can be provided.
The open cell ceiling consists of:
BLADES P600, P1200, P1800
Components type P, crossed together, form a square grid normally in module 600x600 mm (or alternative 600x1200 mm), where panels are mounted.
TM and TF blades assembled in the first phase will form 600x600mm panels, which will be mounted in the initial structure so as to obtain a continuous ceiling without structural or visible interruptions.
Two different mounting systems can be used:
For cell dimensions from 50x50mm to 86x86mm, the load bearing structure consists of P1800 and P600 components disposed as shown in Figure 1 (below).
If the selected panels have cells larger than 86x86mm, the load bearing structure will be made of P600, P1200, P1800 blades, as shown in Figure 2 (below).
PROMETAL proposes solutions according to the cell sizes.
DESIGNED FOR SPECIAL DECORATION OF HEAVY TRAFFIC AREAS TYPICAL CELLS FOR H40 AND H50 ELEMENT
ADVANTAGES OF METAL CEILINGS:
Prometal is one of Romania's pioneers in the production of metal ceilings. I know and appreciate the dedication and effort of those involved in the development of these products so used in construction. Metal panels made in Romania at Popeşti Leordeni meet the most demanding requirements of any architect, builder or beneficiary.
Everything is coordinated with great care starting with product presentation, advantages and disadvantages, order picking, production time, site delivery, storage instructions, installation and maintenance. And all this happens in Romania, with a lot of involvement, responsibility, passion and much soul, thanks to some people, whom I wish them much success!
Prometal metal ceilings have a varied design, are durable, easy to install, easy to maintain, and allow the integration of luminaires, ventilation system grids, safety systems components (sprinklers, smoke sensors, motion sensors, etc.).
A great advantage of Prometal's metal ceilings is that they can be made in special shapes and sizes, required by architects, so that they can make unique projects with great design. They can be used in many environmental areas, almost anywhere: office, commercial, hospital, restaurant, exhibition, airport, etc.
PROMETAL specialists have managed to create a competitive product with versatile aesthetics and multifunctional functionality that can be easily integrated into any industrial and commercial design due to its technical characteristics, optimizing the spaces in which it is mounted by sound and thermal insulation and giving them a distinctive aesthetic look through the multitude of finishes, colors and dimensions.
if you want to know more about our products and services, please contact us.
Soseaua de Centura a Mun. Bucuresti, Nr. 103
Popesti Leordeni, Judet ILFOV, 077160, Romania
On charge: Catalin FECIORU
Cell-phone: (004) 07220.127.116.11