Strips ceilings

THE STRIPS CEILING, MANUFACTURED BY PROMETAL, PROVIDES THE OPPORTUNITY TO ACHIEVE SPECIAL DESIGN PREMISES, DUE TO THE VARIED RANGE OF FORMS, SIZES AND COLOURS OF BLADES.

STRIPS CEILINGS, manufactured by PROMETAL

The strips ceilings, manufactured by PROMETAL, are used for decorative ceiling systems or in-room maximization partitions. This product offers the opportunity to execute projects with a great design, due to the variety of blades: in terms of colour or size.

The variety of blades and installation structures provides the opportunity to assemble strips ceilings in a variety of spaces, like airports, offices, exhibition centres, shops, etc.

The strips ceilings hide electrical installations, ventilation facilities, or any technical route suspended in the ceiling cavity and allow access for technical interventions at any point.

ADVANTAGES

  • Economic and easy to install.

  • Long-term operation. 

  • The painted surfaces do not suffer damage due to dampness or dirt.

FIRE CLASSIFICATION

  • Class 0

  • D.M. dt 26.06.84 (S.O.G.U. n° 234 dt 25.08.84)

  • D.M. dt 14.01.85 (G.U. n° 16 dt 19.01.85)

  • Both for steel and aluminium.

SOUNDPROOFING

To ensure good acoustic insulation, perforated panels (see table of perforations) are recommended, being lined on the inside with a hot-dip black filter.

THERMAL INSULATION

Thermal insulation is made with a mattress made of mineral wool or other similar heat-conducting material, positioned above the ceiling.

INTEGRATED SERVICES

The flexibility of the system allows easy mounting of the following accessories:

  • Lighting fixtures and devices: light channels, ceilings, embedded spotlights, etc.;

  • Air diffusers: air suction and discharge grilles, ceiling diffusers, ventilators, etc.;

  • Safety systems: sprinklers, smoke detectors, etc.

 

TYPES AND SIZES

TYPES AND SIZES

http://www.prometalsrl.ro/files/photos/schema-1.jpg

END CLOSING

For longitudinal junctions or for supporting edge profiles of the blades, different special profiles were made, as in the following table:

For longitudinal junctions or for supporting edge profiles of the blades, different special profiles were made, as in the following table:

http://www.prometalsrl.ro/files/photos/schema2l.jpg

 

CLICK PROFILES

For rounded edge profiles with open intermediate space it is possible to close these spaces with specific profiles according to the following table:

http://www.prometalsrl.ro/files/photos/schema3.jpg

 

EDGE PROFILES

http://www.prometalsrl.ro/files/photos/schema4.jpg

 

http://www.prometalsrl.ro/files/photos/schema5.jpg

COLOURS

PRE-PAINTED

  • White (similar RAL 9003)

  • Silver (similar RAL 9006)

POST-PAINTED

  • The guarantee of a very good aesthetic result for all products is due to the fact that the factory has a modern painting system based on powder coating.

The wide range of colours ensures that the customer's requirements are met.

The painted products are tested to a resistance of more than 1,200 hours of salt spray.

INSTALLATION SYSTEM

The metal blades manufactured by PROMETAL are mounted on various load bearing structures, depending on the technical requirements of the projects. In general, there are two types of load bearing structures:

  • CLASPED ONTO MAIN CARRIER

This typology provides for the mounting of the blades on main carriers. The carriers must be mounted at a distance of 1,270 mm from each other and at a maximum distance.

The hanging system consists of rigid zinc-plated steel hangers and an elastic blade that provides a millimetre adjustment, which allows for a perfect smoothness of the false ceiling.

  • LAID ON EXPOSED PROFILES

In this case, the self-supporting metal ceiling is supported on edge profiles (for surfaces with a width of less than 2,500 mm).

STORAGE AND HANDLING

  • Blades are stored in dry and covered areas.

  • The blades must remain in original packing until installation.

  • Cartons must be stored and oriented as per instructions.

  • Special care must be used during handling and opening of boxes to avoid damages.

MAINTENANCE INSTRUCTIONS

For proper maintenance, we recommend you to comply with the following instructions:

  • Dust should be removed from the surface by wiping them with a clean soft.

  • Any greasy stains will be cleaned with the aid of a fine detergent, especially for this type of product.

  • Don't use abrasive cleaners or rough fabrics. Cleaning is done by simply wiping and in no case by rubbing.

TECHNICAL DETAILS - TYPICAL SECTION


http://www.prometalsrl.ro/files/photos/schema6.jpg

http://www.prometalsrl.ro/files/photos/schema7.jpg

Online contact
You have a section dedicated to fast communication: complete the contact form fields and send the message. The Assistance & Support team will retrieve, analyze and generate a response according to your request.
Customer's voice
Your opinion counts for us and for this reason we invite you to express your opinion on our products, services, operation and collaboration. Any suggestions, tips, recommendations, opinions are welcome.

Categories of manufactured metal ceilings PROMETAL:

Open cell ceilings

Open cell ceilings
by PROMETAL

Details
Strips ceilings

Strips ceilings
by PROMETAL

Details
Ceilings with sight structure

Ceilings with sight structure
by PROMETAL

Details
Ceilings with concealed structure

Ceilings with concealed structure
by PROMETAL

Details

METAL CEILING ADVANTAGES:

10 years

experience

100.000 square metters;

production capacity

500+

satisfied customers

500+

portfolio projects

300+

product types

1 purpose:

CUSTOMER SATISFACTION

CONTACT

we are ready to take any request.

if you want to know more about our products and services, please contact us.

SC PROMETAL SRL

(office, factory, warehouse)

Soseaua de Centura a Mun. Bucuresti, Nr. 103
Popesti Leordeni, Judet ILFOV, 077160, Romania

Phone:

(004) 021.5296.200

On charge: Catalin FECIORU
Cell-phone: (004) 0722.85.57.82

Email:

office@prometalsrl.ro



Start your project

You have ideas?

We have solutions!

Ask for offer

Top